Two of our technicians lifting a new white insulated garage door panel into the opening of a suburban house, with the track already mounted on both sides

Door installation · Barrington, IL

Garage Door Installation in Barrington

New steel and insulated doors for new builds and replacements. We come to your home, measure the opening, take out the old door, and explain the door, the hardware and the price before any work starts.

  • Licensed and insured
  • Upfront quote before work
  • Parts-and-labor warranty

New and replacement doors

Garage door installation, from the measurements to the final test

Garage door installation in Barrington covers two kinds of homes: houses with a worn-out or damaged door that needs replacing, and new construction where the opening is ready for its first door. The work is similar in both cases. We measure the opening for width and height, then check the headroom over the door, the side room along the jambs and the depth of the garage, because those clearances decide which track and spring setup fits.

A residential door is built from horizontal panels that hinge together and ride in steel tracks on rollers. The panels are made of steel, and the choice is between a single-layer steel panel and an insulated one. Insulated panels have a core of polyurethane or polystyrene, which resists heat flow, holds the panel straight and makes the door quieter in use. In the northwest suburbs, where winter temperatures stay low for months, an insulated door matters most when the garage is attached to the house or used as a workshop.

When we replace a door, we remove the old door, the track and the springs, then check the jambs and the header for rot or damage before anything new goes on. Rotted trim is easier to fix before a new door is hung than after. The new door goes in with a bottom seal, weatherstripping along the sides and top, torsion springs sized to its weight, and cables set on the drums.

If your opener is old, a new door is a good time to price a new opener as well. If the problem is only a bent panel or a worn part, a repair can be enough, and we will say so when the door is worth keeping.

A repaired two-car garage door fully closed on a suburban brick house, its panels evenly aligned
A door that closes level and quiet

Door options

Choices we walk you through

Steel or insulated steel

Single-layer steel suits a detached garage that stays cold. Insulated steel suits an attached garage and a workshop, and it resists dents better.

Panel style and windows

Flat, raised or carriage-style panels, with or without a row of windows. We explain how each choice changes the weight of the door and the springs.

Size and clearances

A single door is commonly 8 or 9 feet wide, a double is commonly 16 feet, and heights are commonly 7 or 8 feet. We measure the real opening, since older garages vary.

Springs and hardware

We match the springs to the new door's weight and use new track, rollers, hinges and cables, so the door does not inherit worn parts.

Seals and weatherstripping

A flexible bottom seal and sealed jambs keep out drafts, rain and snowmelt, which adds comfort to an attached garage.

Removal of the old door

We take out the old door and its hardware as part of the job, and check the opening for damage before the new one goes in.

The installation visit

How a garage door installation goes

  1. 01

    You call and tell us what you need

    Tell us whether you are replacing a door or fitting one in new construction, and what you want from the new door.

  2. 02

    We come out and measure the opening

    The technician measures the opening and clearances, checks the jambs and header, and talks through the door options with you.

  3. 03

    We explain the door and the price

    You hear what each option involves and get an upfront quote before any work begins.

  4. 04

    We install, balance and test

    We remove the old door, install the new one, set the springs, connect the opener and test the balance and the safety reversal. The installation carries a parts-and-labor warranty.

Thinking about a new garage door?

Tell us what you have now and what you want, and we will talk through the options and the price.

Installed doors

New doors, installed

A suburban two-car house with a new insulated steel garage door in a neutral color, flat panels and a row of plain windows, closed and level
A new insulated steel door, closed and level
Close view of a hinge, roller and steel track on a newly installed garage door panel, bolts tight and track clean
New hinges, rollers and track
Close view of a new torsion spring with steel cable wound evenly onto a grooved cable drum, lubricant on the coils
New spring, fresh cable, clean drum

Installation answers

Garage door installation questions

Can I install a new garage door myself?
It is not a job we would hand to a homeowner. The door panels are heavy, and the torsion springs hold dangerous stored force, so a slip can cause serious injury. Spring winding in particular should be left to a trained technician.
Is it cheaper to repair or replace a garage door?
Repairing is usually the lower cost when the problem is a spring, cable, roller or opener, and the panels are sound. Replacing makes more sense when several panels are cracked, rusted or bent, or the door no longer seals. We look at the door and tell you which one it is.
How is the price of a new garage door worked out?
The price depends on the size of the opening, the door type and insulation, the windows and style you choose, the hardware and springs it needs, and any trim repair around the opening. Our technician gives an upfront quote before any work begins.
What is the standard height of a garage door?
Residential garage doors are commonly 7 or 8 feet tall. Widths are commonly 8 or 9 feet for a single door and 16 feet for a double. Older homes and custom garages differ, so we measure the actual opening before ordering.
How long does a garage door installation take?
A standard residential replacement is usually completed in one trip to your home. A custom-size opening or framing that needs repair first can add time, and we tell you that when we measure.
Will my old opener work with a new door?
Often it will, as long as it is in working order and has current safety sensors. We connect it to the new door, reset the travel and force, and test the reversal. If the opener is worn out, we say so.

Serving Barrington, IL

Ready for a new garage door?

Tell us about the door you have and the one you want. We will come out, measure the opening, and explain the door, the hardware and the price before any work starts.